Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-16A
Bolt Undrilled AN5-16A
1.61 EUR/EA
Excluding VAT
Availability
24 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
15,524 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-16A
- Manufacturer
- 16131-5
- Manufacturer / Vendor
- AN5-16A
Product details
| Dash No. | Nominal Length | Grip Length | AN5C Stainless Drilled | AN5C Stainless Undrilled |
|---|---|---|---|---|
| -16 | 1-27/32 | 1-5/16 | -- | -- |
Overview
| Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. Available with shank drilled for cotter pin or undrilled for stop nut application, and with or without drilled head for safety wire. Specify bolts to have undrilled shank by adding letter "A" after the dash number. For bolts with drilled head add letter "H" after the AN number. See illustrated examples. "C" represents Type 431 Stainless Steel (contains iron which is magnetic). The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. See table for conversion of length and/or grip to proper AN callout. |
Reference Chart
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.313" |
| Length +.031" / -.016" | 1.844" |
| Locking Mechanism | None |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 10 PER |
| Ref Pc Weight (lb) | 0.048 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |