Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN4-40A
Bolt Undrilled AN4-40A
4.21 EUR/EA
Excluding VAT
Availability
15 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 120 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
Up to 132 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
148 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN4-40A
- Manufacturer
- 05584-5
- Manufacturer / Vendor
- AN4-40A
Product details
The Airfasco AN4-40A is an undrilled hex-head aircraft bolt in the AN4, 1/4-28 series. Its undrilled shank configuration is intended for installations using a stop nut rather than a cotter-pin arrangement.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN4-40A; 05584-5
- Configuration: undrilled shank
- Nominal length: approximately 102 mm
- Grip length: approximately 90 mm
- Unit of supply: each
Use the applicable maintenance data and fastening requirements to confirm correct selection for the intended installation.
| Diameter | 0.249" - 0.246" |
|---|---|
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.563" |
| Length +.031" / -.016" | 4.031" |
| Locking Mechanism | None |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.060 |
| Thread Length | 0.468" |
| Thread Specs | 1/4-28 UNF-3A |