Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN8-7
Bolt Drilled AN8-7
5.94 EUR/EA
Excluding VAT
Availability
Up to 7 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
1 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN8-7
- Manufacturer
- 03160-1
- Manufacturer / Vendor
- AN8-7
Product details
The AN8-7 is a drilled-shank, hex-head aircraft bolt for hardware applications requiring the AN8-7 designation.
- Part number: AN8-7
- Manufacturer part number: 03160-1
- Roctexo part number: RX1-AN8-7
- Thread: 1/2-20
- Nominal length: approximately 25 mm, measured from beneath the head to the end of the shank
- Grip length: approximately 5 mm
- Drilled shank for cotter-pin retention arrangements
Suitable for procurement where the AN8-7 / 03160-1 part designation is specified. Verify the required configuration and applicable technical documentation before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.499" - 0.495" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 0.188" |
| Length +.031" / -.016" | 0.969" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.084 |
| Thread Length | 0.781" |
| Thread Specs | 1/2-20 UNF-3A |
| Unit Of Measure | EA |