Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN8-50
Bolt Drilled AN8-50
20.43 EUR/EA
Excluding VAT
Availability
Up to 11 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
145 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN8-50
- Manufacturer
- 13780-5
- Manufacturer / Vendor
- AN8-50
Product details
The Airfasco AN8-50 is a drilled AN-series aircraft bolt for maintenance and replacement procurement where the specified part number is required. The basic AN8 designation identifies a 1/2-20 UNF-3A thread size.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN8-50; 13780-5
- Roctexo part number: RX1-AN8-50
- Configuration: drilled shank
- Finish configuration: alloy-steel, cadmium-plated basic part-number configuration
- Nominal length: approximately 129 mm, measured from under the head to the end of the shank
- Nominal grip length: approximately 110 mm
- Unit of supply: each
Please verify the required part number, dimensions and installation requirements against the applicable approved maintenance data before use.
| Condition | NEW |
|---|---|
| Diameter | 0.499" - 0.495" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 4.313" |
| Length +.031" / -.016" | 5.094" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.31 |
| Thread Length | 0.781" |
| Thread Specs | 1/2-20 UNF-3A |
| Unit Of Measure | EA |