Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN8-47
Bolt Drilled AN8-47
20.50 EUR/EA
Excluding VAT
Availability
Up to 9 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 23 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
70 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN8-47
- Manufacturer
- 13778-1
- Manufacturer / Vendor
- AN8-47
Product details
The Bolt Drilled AN8-47 is a hex-head aircraft bolt for hardware and maintenance applications requiring an AN8-series fastener with a drilled shank for cotter-pin retention.
- Manufacturer part number: 13778-1
- Roctexo part number: RX1-AN8-47
- Thread designation: AN8 series, 1/2-20
- Drilled shank configuration
- Nominal length: approximately 126 mm, measured from under the head to the end of the shank
- Nominal grip length: approximately 106 mm
Confirm the required bolt configuration, grip length, thread condition, and applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.499" - 0.495" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 4.188" |
| Length +.031" / -.016" | 4.969" |
| Locking Mechanism | Drilled Shank |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.30 |
| Thread Length | 0.781" |
| Thread Specs | 1/2-20 UNF-3A |
| Unit Of Measure | EA |