Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN8-44
Bolt Drilled AN8-44
11.03 EUR/EA
Excluding VAT
Availability
15 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN8-44
- Manufacturer
- 13769-1
- Manufacturer / Vendor
- AN8-44
Product details
The Airfasco AN8-44 is a drilled AN-series aircraft bolt for use where the specified AN8-44 configuration is required. The drilled shank is intended for cotter-pin retention arrangements where specified by the applicable maintenance data.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN8-44, 13769-1
- Thread designation: 1/2-20 UNF
- Nominal length: approximately 117 mm
- Grip length: approximately 97 mm
- Unit of measure: each
Please verify the required part number, bolt length, grip length, thread form, and installation requirements against the applicable approved maintenance or engineering data before installation.
| Carton Quantity | 175 PER |
|---|---|
| Diameter | 0.499" - 0.495" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.813" |
| Length +.031" / -.016" | 4.594" |
| Locking Mechanism | Drilled Shank |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.28 |
| Thread Length | 0.781" |
| Thread Specs | 1/2-20 UNF-3A |