Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN8-41
Bolt Drilled AN8-41
6.24 EUR/EA
Excluding VAT
Availability
Up to 13 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 38 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
846 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN8-41
- Manufacturer
- 13763-1
- Manufacturer / Vendor
- AN8-41
Product details
The Airfasco AN8-41 is a drilled-shank AN aircraft bolt for applications requiring a 1/2-20 UNF-3A threaded fastener and provision for cotter-pin retention.
- Manufacturer: Airfasco
- Part numbers: AN8-41; 13763-1
- Thread: 1/2-20 UNF-3A
- Nominal length: approximately 107 mm, measured from beneath the head to the end of the shank
- Grip length: approximately 87 mm
- Material: 4037 or 8740 alloy steel
- Finish: Cadmium plated to AMS-QQ-P-416, Type II, Class 2
- Configuration: Drilled shank
Please verify the required part number, dimensions and installation method against the applicable approved maintenance or engineering data before use.
Reference documentation: Airfasco AN8-41 product information.
| Condition | NEW |
|---|---|
| Diameter | 0.499" - 0.495" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.438" |
| Length +.031" / -.016" | 4.219" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.26 |
| Thread Length | 0.781" |
| Thread Specs | 1/2-20 UNF-3A |
| Unit Of Measure | EA |