Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN7-44
Bolt Drilled AN7-44
7.66 EUR/EA
Excluding VAT
Availability
Up to 63 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 101 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
2,251 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN7-44
- Manufacturer
- 12588-1
- Manufacturer / Vendor
- AN7-44
Product details
The Airfasco AN7-44 is a drilled-shank, hex-head aircraft bolt for use where an AN7-44 fastener is specified. The drilled shank accommodates cotter-pin locking arrangements.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN7-44; 12588-1
- Thread designation: 7/16-20 UNF
- Nominal under-head length: approximately 117 mm
- Nominal grip length: approximately 100 mm
- Configuration: drilled shank
- Unit of measure: each
Please verify the required part number, dimensions, locking method and applicable approved maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.437" - 0.433" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.938" |
| Length +.031" / -.016" | 4.594" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.21 |
| Thread Length | 0.656" |
| Thread Specs | 7/16-20 UNF-3A |
| Unit Of Measure | EA |