Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN7-22
Bolt Drilled AN7-22
6.19 EUR/EA
Excluding VAT
Availability
Up to 104 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 113 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
106 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN7-22
- Manufacturer
- 12565-1
- Vendor
- ASS-AN7-22
- Manufacturer / Vendor
- AN7-22
Product details
AN7-22 drilled-shank hex-head aircraft bolt for aerospace hardware applications. Manufactured by Airfasco and identified by manufacturer part numbers AN7-22 and 12565-1.
- AN7 series bolt with 7/16-20 thread
- Drilled shank for cotter-pin retention arrangements
- Nominal under-head length: approximately 59 mm
- Nominal unthreaded grip length: approximately 43 mm
- High-strength alloy-steel construction with cadmium plating, as specified for the referenced AN bolt series
- Supplied per each (EA)
Please confirm the required part number, bolt length, grip length, thread, and retention configuration against the applicable approved maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.437" - 0.433" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.688" |
| Length +.031" / -.016" | 2.344" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.117 |
| Thread Length | 0.656" |
| Thread Specs | 7/16-20 UNF-3A |
| Unit Of Measure | EA |