Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-45
Bolt Drilled AN6-45
5.61 EUR/EA
Excluding VAT
Availability
Up to 20 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 72 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
509 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-45
- Manufacturer
- 11732-1
- Manufacturer / Vendor
- AN6-45
Product details
The Airfasco AN6-45 is a drilled-shank AN aircraft bolt for fastener installations specified for the AN6-45 configuration. Manufacturer reference: 11732-1.
- Part number: AN6-45
- Manufacturer: Airfasco
- Drilled shank for cotter-pin retention where specified
- Thread: 3/8-24 UNF
- Nominal under-head length: approximately 119 mm
- Nominal grip length: approximately 103 mm
- Unit of measure: each
Please confirm the required part number, fastener configuration and installation requirements against the applicable approved maintenance data before use.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 4.063" |
| Length +.031" / -.016" | 4.703" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.157 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |