Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-44
Bolt Drilled AN6-44
9.19 EUR/EA
Excluding VAT
Availability
4 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 11 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
Up to 60 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
58 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-44
- Manufacturer
- 11729-1
- Manufacturer / Vendor
- AN6-44
Product details
Drilled AN6-44 aircraft bolt from Airfasco, identified by manufacturer part numbers AN6-44 and 11729-1.
This AN6-series hex-head bolt has a drilled shank for cotter-pin retention where the applicable assembly design calls for it. The AN6 thread size is 3/8-24.
- Manufacturer part numbers: AN6-44, 11729-1
- Series: AN6 drilled aircraft bolt
- Thread: 3/8-24
- Nominal length: approximately 117 mm
- Grip length: approximately 100 mm
- Unit of measure: each
Confirm the required bolt callout, grip length, thread engagement, and retention method against the applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.938" |
| Length +.031" / -.016" | 4.578" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.153 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |