Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-41
Bolt Drilled AN6-41
5.75 EUR/EA
Excluding VAT
Availability
Up to 30 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 42 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
1,276 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-41
- Manufacturer
- 11722-1
- Manufacturer / Vendor
- AN6-41
Product details
The Airfasco AN6-41 is a drilled-thread alloy-steel AN aircraft bolt, identified by manufacturer part numbers AN6-41 and 11722-1. It features a 3/8-24 UNF-3A thread and cadmium plating. The drilled threaded end is intended for cotter-pin retention arrangements where specified by the applicable maintenance data.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN6-41; 11722-1
- Thread: 3/8-24 UNF-3A
- Material / finish: Alloy steel, cadmium plated
- Nominal under-head length: approximately 107 mm
- Nominal grip length: approximately 90.5 mm
- Unit of supply: Each
Please verify the required part number, dimensions, finish and installation configuration against current approved maintenance data before installation. ([airfasco.com](https://airfasco.com/products/AN/AN3-AN20/AN6.php))
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.563" |
| Length +.031" / -.016" | 4.203" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.141 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |