Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-36
Bolt Drilled AN6-36
3.92 EUR/EA
Excluding VAT
Availability
6 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 56 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
Up to 82 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
174 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-36
- Manufacturer
- 11714-1
- Manufacturer / Vendor
- AN6-36
Product details
The Airfasco AN6-36 is a drilled AN6 aircraft bolt for hardware applications requiring a 3/8-24 threaded fastener with a drilled shank for cotter-pin retention.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN6-36, 11714-1
- Thread: 3/8-24
- Nominal length: approximately 97.6 mm, measured from under the head to the end of the shank
- Grip length: approximately 81 mm
- Configuration: drilled shank
- Unit of measure: each
Please verify the required part number, length, grip and installation requirements against the applicable approved maintenance data before purchase and installation.
| Diameter | 0.374" - 0.371" |
|---|---|
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.188" |
| Length +.031" / -.016" | 3.828" |
| Locking Mechanism | Drilled Shank |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.130 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |