Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-34
Bolt Drilled AN6-34
4.35 EUR/EA
Excluding VAT
Availability
6 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
6 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-34
- Manufacturer
- 11711-1
- Manufacturer / Vendor
- AN6-34
Product details
The Airfasco AN6-34 is a drilled-shank AN aircraft bolt for maintenance and assembly work requiring an AN6 fastener configuration. The drilled shank is intended for cotter-pin retention where specified by the applicable maintenance data.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN6-34; 11711-1
- Thread: 3/8-24 UNF-3A
- Nominal length: 90.9 mm, measured from beneath the head
- Nominal grip length: 74.6 mm
- Material: Alloy steel
- Finish: Cadmium plated
- Unit of measure: Each
Please confirm the required part number, grip length, drilling configuration and applicable technical data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 2.938" |
| Length +.031" / -.016" | 3.578" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 1 PER |
| Ref Pc Weight (lb) | 0.122 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |