Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-24
Bolt Drilled AN6-24
2.98 EUR/EA
Excluding VAT
Availability
10 EA ready to ship TomorrowOrder before 15:30 CET Tomorrow
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 74 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Tomorrow
Up to 176 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Tomorrow
286 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-24
- Manufacturer
- 11700-5
- Manufacturer / Vendor
- AN6-24
Product details
The Airfasco AN6-24 is a drilled-thread aircraft bolt for maintenance and replacement requirements specified by the applicable approved data.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN6-24; 11700-5
- Roctexo part number: RX1-AN6-24
- Thread: 3/8-24 UNF-3A
- Configuration: drilled threads
- Material and finish: alloy steel, cadmium plated
- Nominal length: approximately 65.5 mm, measured from beneath the head to the end of the shank
- Nominal grip length: approximately 49.2 mm
- Unit of measure: each
Please verify the required part number, grip length, locking method and installation requirements against the applicable maintenance documentation before fitment.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.938" |
| Length +.031" / -.016" | 2.578" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.091 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |