Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-20
Bolt Drilled AN6-20
3.25 EUR/EA
Excluding VAT
Availability
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Part numbers
- Roctexo
- RX1-AN6-20
- NSN
- 5306-00-167-3686
- Manufacturer
- 11693-25
- Manufacturer / Vendor
- AN6-20
Product details
The Airfasco AN6-20 is a drilled hex-head aircraft bolt supplied individually. It is identified by manufacturer part numbers AN6-20 and 11693-25.
This dash-size bolt has a nominal under-head length of approximately 52.4 mm and an unthreaded grip length of approximately 36.5 mm. The drilled configuration is intended for installations specified to use shank drilling with cotter-pin retention.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN6-20; 11693-25
- Configuration: drilled shank
- Nominal length: approximately 52.4 mm
- Nominal grip length: approximately 36.5 mm
- Unit of measure: each
Please verify the required part number, dash size, length, grip, and installation requirements against the applicable maintenance data before ordering or fitting.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.438" |
| Length +.031" / -.016" | 2.078" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.076 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |