Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-15
Bolt Drilled AN6-15
3.48 EUR/EA
Excluding VAT
Availability
1 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 214 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
253 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-15
- NSN
- 5306-00-151-1336
- Manufacturer
- 11689-1
- Manufacturer / Vendor
- AN6-15
Product details
The Airfasco AN6-15 is a drilled hex-head aircraft bolt for hardware installations requiring an AN6-size fastener. The drilled shank is intended for cotter-pin retention arrangements where the applicable assembly design specifies this type of bolt.
- Manufacturer part numbers: AN6-15; 11689-1
- Thread: 3/8-24
- Nominal length: approximately 44 mm, measured from under the head to the end of the shank
- Grip length: approximately 27 mm
- Drilled shank configuration
- Alloy-steel bolt with cadmium plating
Confirm the required fastener callout, grip length, thread engagement, material condition, and installation requirements against the applicable approved maintenance data before use.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.063" |
| Length +.031" / -.016" | 1.703" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.064 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |