Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-14
Bolt Drilled AN6-14
3.16 EUR/EA
Excluding VAT
Availability
9 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 168 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
Up to 304 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
361 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-14
- Manufacturer
- 11688-10
- Manufacturer / Vendor
- AN6-14
Product details
Airfasco AN6-14 drilled hex-head aircraft bolt, supplied individually. The drilled shank is intended for cotter-pin retention where specified by the applicable installation data.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN6-14; 11688-10
- Thread designation: 3/8-24
- Nominal under-head length: approximately 40.5 mm
- Nominal unthreaded grip length: approximately 23.8 mm
- Drilled shank configuration
- Unit of measure: each
Please confirm the required part number, length, grip, thread, material condition and retention method against the applicable maintenance data or engineering documentation before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 0.938" |
| Length +.031" / -.016" | 1.578" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 10 PER |
| Ref Pc Weight (lb) | 0.060 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |