Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN6-11
Bolt Drilled AN6-11
2.03 EUR/EA
Excluding VAT
Availability
5 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 52 EA ready to ship on Thursday 2026-11-12Order before 15:30 CET Today
296 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN6-11
- Manufacturer
- 11683-1
- Manufacturer
- 11683-5
- Manufacturer / Vendor
- AN6-11
Product details
The Airfasco AN6-11 is a drilled-shank AN airframe bolt for maintenance and hardware replacement requirements specified by the AN6-11 designation.
- Manufacturer part number: AN6-11
- Additional manufacturer references: 11683-1, 11683-5
- Thread: 3/8-24
- Nominal length: 30.6 mm
- Grip length: 14.3 mm
- Drilled shank configuration
- Unit of measure: each
Please verify the required part number, configuration and installation requirements against the applicable approved maintenance data before use.
| Condition | NEW |
|---|---|
| Diameter | 0.374" - 0.371" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 0.563" |
| Length +.031" / -.016" | 1.203" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.049 |
| Thread Length | 0.64" |
| Thread Specs | 3/8-24 UNF-3A |
| Unit Of Measure | EA |