Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-47
Bolt Drilled AN5-47
4.31 EUR/EA
Excluding VAT
Availability
Up to 60 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 106 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
19 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-47
- Manufacturer
- 10848-1
- Manufacturer / Vendor
- AN5-47
Product details
The Airfasco AN5-47 is a drilled-shank, hex-head AN airframe bolt for use where this part number and drilled-shank configuration are specified by the applicable approved maintenance or engineering data.
- Manufacturer part number: AN5-47
- Additional reference: 10848-1
- Thread: 5/16-24 UNF
- Drilled shank for cotter-pin retention arrangements
- Alloy-steel construction with cadmium plating
- Nominal under-head length: approximately 126 mm
- Nominal unthreaded grip length: approximately 113 mm
Supplied as one piece. Verify the required bolt callout, grip length, retention method and applicable installation data before purchase and installation.
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 4.438" |
| Length +.031" / -.016" | 4.969" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 1 PER |
| Ref Pc Weight (lb) | 0.115 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |