Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-40
Bolt Drilled AN5-40
3.91 EUR/EA
Excluding VAT
Availability
Up to 89 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 112 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
222 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-40
- Manufacturer
- 10831-1
- Manufacturer / Vendor
- AN5-40
Product details
Airfasco Bolt Drilled AN5-40, manufacturer part number 10831-1. This AN5 series aircraft bolt has a drilled shank for cotter-pin retention arrangements.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN5-40; 10831-1
- Thread: 5/16-24
- Nominal length: approximately 104 mm, measured from beneath the head to the end of the shank
- Grip length: approximately 90 mm
- Drilled shank configuration
- Unit of measure: each
Suitable for maintenance and assembly requirements where the specified AN5-40 drilled bolt configuration is required. Verify the applicable maintenance data, installation requirements and part-number callout before use.
| Diameter | 0.312" - 0.309" |
|---|---|
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.563" |
| Length +.031" / -.016" | 4.094" |
| Locking Mechanism | Drilled Shank |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.096 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |