Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-36
Bolt Drilled AN5-36
2.17 EUR/EA
Excluding VAT
Availability
Up to 16 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 87 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
2,903 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-36
- Manufacturer
- 10824-5
- Manufacturer / Vendor
- AN5-36
Product details
The Airfasco AN5-36 is a drilled-shank aircraft bolt for maintenance and assembly requirements calling for the AN5-36 configuration. The drilled shank accommodates cotter-pin locking arrangements where specified by the applicable technical data.
- Manufacturer: Airfasco
- Manufacturer part number: AN5-36
- Additional reference: 10824-5
- Thread: 5/16-24 UNF-3A
- Material: 4037 or 8740 alloy steel
- Finish: Cadmium plated to AMS-QQ-P-416, Type II, Class 2
- Configuration: Drilled shank
- Approximate overall length: 97.6 mm
- Approximate grip length: 84.2 mm
- Unit of measure: Each (EA)
Verify the required part number, dimensions, locking arrangement and finish against the applicable approved maintenance or engineering data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.313" |
| Length +.031" / -.016" | 3.844" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.091 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |