Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-33
Bolt Drilled AN5-33
2.47 EUR/EA
Excluding VAT
Availability
Up to 51 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 151 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
74 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-33
- Manufacturer
- 10812-5
- Manufacturer / Vendor
- AN5-33
Product details
The Airfasco AN5-33 is a drilled AN5-series aircraft bolt for installations requiring a drilled shank for cotter-pin retention.
- Manufacturer part numbers: AN5-33; 10812-5
- AN5 thread designation: 5/16-24
- Nominal under-head length: approximately 88 mm
- Nominal unthreaded grip length: approximately 75 mm
- Drilled shank configuration
- Unit of measure: each
Please verify the required bolt callout, grip length, thread condition and installation requirements against the applicable approved maintenance data before ordering or fitting.
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 2.938" |
| Length +.031" / -.016" | 3.469" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.083 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |