Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-32
Bolt Drilled AN5-32
3.71 EUR/EA
Excluding VAT
Availability
Up to 69 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 81 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
160 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-32
- Manufacturer
- 10810-5
- Manufacturer / Vendor
- AN5-32
Product details
The Airfasco AN5-32 is a drilled-shank alloy-steel aircraft bolt with a 5/16-24 UNF-3A thread. The drilled shank provides provision for cotter-pin locking where specified by the applicable maintenance or engineering data.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN5-32; 10810-5
- Thread: 5/16-24 UNF-3A
- Shank configuration: drilled
- Material: alloy steel, grade 4037 or 8740
- Finish: cadmium plated to AMS-QQ-P-416, Type II, Class 2
- Overall length: approximately 85 mm
- Grip length: approximately 71 mm
- Unit of measure: each
Please verify the required part number, dimensions, locking arrangement and material/finish requirements against the applicable approved maintenance data before installation.
Reference documentation: Airfasco AN3–AN20 Series Drawing (PDF). This manufacturer reference is provided for general information; use approved maintenance and procurement data for installation and applicability decisions.
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 2.813" |
| Length +.031" / -.016" | 3.344" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.080 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |