Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN5-24
Bolt Drilled AN5-24
1.52 EUR/EA
Excluding VAT
Availability
Up to 24 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 40 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
359 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN5-24
- Manufacturer
- 10798-5
- Vendor
- ASS-AN5-24
- Manufacturer / Vendor
- AN5-24
Product details
The AN5-24 is a drilled-shank hex-head aircraft bolt for use where the applicable maintenance data calls for an AN5-24 configuration. The drilled shank is intended to accommodate cotter-pin locking arrangements where specified.
- Part number: AN5-24
- Additional reference: 10798-5
- Thread: 5/16-24
- Nominal length: approximately 66 mm
- Grip length: approximately 52 mm
- Configuration: drilled shank
AN-series bolt length is measured from beneath the head to the end of the shank. Confirm the required part number, grip length, locking method and applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.312" - 0.309" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 2.063" |
| Length +.031" / -.016" | 2.594" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 10 PER |
| Ref Pc Weight (lb) | 0.064 |
| Thread Length | 0.531" |
| Thread Specs | 5/16-24 UNF-3A |
| Unit Of Measure | EA |