Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN4-41
Bolt Drilled AN4-41
3.39 EUR/EA
Excluding VAT
Availability
Up to 59 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 108 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
15,636 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN4-41
- Manufacturer
- 09876-5
- Manufacturer / Vendor
- AN4-41
Product details
The Airfasco AN4-41 is a drilled-shank aircraft bolt for maintenance and hardware replacement requirements where the specified AN4-41 configuration is required.
- Manufacturer: Airfasco
- Manufacturer part numbers: AN4-41; 09876-5
- Thread: 1/4-28 UNF-3A
- Material: Alloy steel, grade 4037 or 8740
- Finish: Cadmium plated to AMS-QQ-P-416, Type II, Class 2
- Shank: Drilled
- Nominal length: approximately 106 mm
- Grip length: approximately 94 mm
- Thread length: approximately 12 mm
Supplied as one each. Verify the required part number, dimensions and installation requirements against the applicable approved maintenance data before use.
Manufacturer documentation: Airfasco AN4-41 product information.
| Condition | NEW |
|---|---|
| Diameter | 0.249" - 0.246" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.688" |
| Length +.031" / -.016" | 4.156" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.061 |
| Thread Length | 0.468" |
| Thread Specs | 1/4-28 UNF-3A |
| Unit Of Measure | EA |