Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN4-31
Bolt Drilled AN4-31
1.93 EUR/EA
Excluding VAT
Availability
6 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Up to 497 EA ready to ship on Monday 2026-11-16Order before 15:30 CET Today
1,325 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN4-31
- Manufacturer
- 09866-1
- Manufacturer
- 09866-5
- Manufacturer / Vendor
- AN4-31
Product details
The AN4-31 is a drilled-shank hex-head aircraft bolt in the AN4, 1/4-28 thread series. The drilled shank is intended for cotter-pin retention where the applicable installation requires it.
- Part number: AN4-31
- Manufacturer part numbers: 09866-1, 09866-5
- Nominal length: approximately 79 mm
- Grip length: approximately 68 mm
- Thread series: 1/4-28
- Unit of measure: each
Please verify the required bolt length, grip, thread, material and installation configuration against the applicable maintenance data before ordering.
| Diameter | 0.249" - 0.246" |
|---|---|
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 2.688" |
| Length +.031" / -.016" | 3.156" |
| Locking Mechanism | Drilled Shank |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.048 |
| Thread Length | 0.468" |
| Thread Specs | 1/4-28 UNF-3A |