Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN4-14
Bolt Drilled AN4-14
1.11 EUR/EA
Excluding VAT
Availability
33 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
19,195 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN4-14
- Manufacturer
- 09848-10
- Manufacturer
- 09848-5
- Manufacturer / Vendor
- AN4-14
Product details
The AN4-14 is a drilled-shank hex-head aircraft bolt for applications requiring a cotter-pin retention arrangement. It is supplied in the AN4 series, with a nominal shank thread of 1/4-28.
- Part number: AN4-14
- Manufacturer reference part numbers: 09848-10, 09848-5
- Drilled shank configuration
- Cadmium-plated high-strength alloy-steel construction
- Nominal length under head to end of shank: approximately 39 mm
- Unthreaded grip length: approximately 27 mm
- Unit of measure: each
Confirm the required bolt length, grip, thread configuration, and installation data against the applicable approved maintenance documentation before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.249" - 0.246" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.063" |
| Length +.031" / -.016" | 1.531" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 10 PER |
| Ref Pc Weight (lb) | 0.025 |
| Thread Length | 0.468" |
| Thread Specs | 1/4-28 UNF-3A |
| Unit Of Measure | EA |