Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN3-36
Bolt Drilled AN3-36
1.44 EUR/EA
Excluding VAT
Availability
Up to 118 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Tomorrow
Up to 278 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Tomorrow
2,046 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN3-36
- NSN
- 5306-00-144-3671
- Manufacturer
- 08574-1
- Manufacturer / Vendor
- AN3-36
Product details
The AN3-36 is a drilled-shank, hex-head aircraft bolt in the AN3 series, with a 10-32 thread. It is intended for use where the specified installation calls for an AN3-36 bolt with a shank drilled for cotter-pin retention.
- Roctexo part number: RX1-AN3-36
- Manufacturer reference: 08574-1
- Thread: 10-32
- Nominal length: approximately 96 mm, measured from under the head to the end of the shank
- Grip length: approximately 86 mm
- Drilled shank; drilled head is not indicated
- Alloy-steel bolt with cadmium plating, as stated in the supplied product reference
- Unit of measure: each
Please verify the required part number, length, grip and retention method against the applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.189" - 0.186" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.375" |
| Length +.031" / -.016" | 3.781" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 5 PER |
| Ref Pc Weight (lb) | 0.033 |
| Thread Length | 0.406" |
| Thread Specs | 10-32 UNF-3A |
| Unit Of Measure | EA |