Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN3-14
Bolt Drilled AN3-14
1.26 EUR/EA
Excluding VAT
Availability
3 EA ready to ship TomorrowOrder before 15:30 CET Tomorrow
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Part numbers
- Roctexo
- RX1-AN3-14
- NSN
- 5306-00-144-3653
- Manufacturer
- 08505-5
- Manufacturer / Vendor
- AN3-14
Product details
The AN3-14 is a drilled-shank hex-head aircraft bolt for installations requiring a cotter-pin retention arrangement. It has a 10-32 thread designation, a nominal under-head length of approximately 39 mm, and an unthreaded grip length of approximately 29 mm.
- Part number: AN3-14
- Manufacturer reference: 08505-5
- Drilled shank for cotter-pin use
- Nominal length: approximately 39 mm
- Grip length: approximately 29 mm
- Alloy-steel bolt with cadmium plating
- Minimum tensile strength: 125,000 psi
- Supplied as one each
Select and install only in accordance with the applicable approved maintenance data, hardware schedule, and required locking method.
| Condition | NEW |
|---|---|
| Diameter | 0.189" - 0.186" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 1.125" |
| Length +.031" / -.016" | 1.531" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 10 PER |
| Ref Pc Weight (lb) | 0.0152 |
| Thread Length | 0.406" |
| Thread Specs | 10-32 UNF-3A |
| Unit Of Measure | EA |