Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN3-11
Bolt Drilled AN3-11
1.43 EUR/EA
Excluding VAT
Availability
5 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
15 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN3-11
- NSN
- 5306-00-144-3650
- Manufacturer
- 08493-5
- Manufacturer / Vendor
- AN3-11
Product details
The AN3-11 is a drilled-shank, hex-head aircraft bolt for applications requiring an AN3 (10-32) fastener. The drilled shank is intended to accommodate cotter-pin retention where the applicable assembly design calls for it.
- Part number: AN3-11
- Alternate manufacturer part number: 08493-5
- Thread size: 10-32
- Nominal length: approximately 28.6 mm
- Grip length: approximately 19.1 mm
- Configuration: drilled shank
- Unit of measure: each
Please verify the required bolt callout, length, grip, material and retention arrangement against the applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.189" - 0.186" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 0.75" |
| Length +.031" / -.016" | 1.156" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | 10 PER |
| Ref Pc Weight (lb) | 0.0122 |
| Thread Length | 0.406" |
| Thread Specs | 10-32 UNF-3A |
| Unit Of Measure | EA |