Image for illustration only. It may show a product series rather than the exact product offered.
RX1-11-10835
BatteryMINDer Airframe Interface Kit For FAA-Certified Aircraft 24v
82.13 EUR/EA
Excluding VAT
Availability
Up to 23 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Today
Up to 44 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Today
129 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-11-10835
- Manufacturer
- BM-AIK2A
- Vendor
- ASS-11-10835
- Vendor
- 11-10835
Product details
Overview
| This kit provides standard aircraft parts acceptable under 14 CFR §21.9 for a FAA certificated mechanic to fabricate and install a fused, 2-wire harness for connecting an aviation-specific BatteryMINDer® brand of low-current, continuous-duty, maintenance-type battery charger. The finished harness typically has ring terminals attached to the battery relay connecting to a Anderson SB50 polarized plug at the opposite end by up to 6 feet of MIL-spec unshielded 16-gauge aircraft wire, with a 10-amp in-line fuse. The SB50 plus is encased in a 670-420 SB50 Handle Kit which provides a rugged hand grip. An insulating dust cover protects the plug when not connected to the charger. Anti-chafe sleeving is included. This kit is eligible for installation by a licensed mechanic as a minor alteration under 14 CFR §1.1 and §21.93(a) as it has “no appreciable effect on the weight, balance, structural strength, reliability, operational characteristics, or other characteristics affecting the airworthiness” of the aircraft. No STC, Form 337 submittal or FSDO field approval is required per FAA Order 8900.1 Figure 4-67. A §43.9 airframe logbook entry is sufficient to document this alteration and return the aircraft to service. Also includes a short harness to adapt the charger’s SAE output connector to a mating Anderson SB50 plug. This harness is connected to and remains with the charger. It is not installed on the aircraft. |
In The Box
- SB50 polarized plug with in-line fuse (assembly tips)
- 6' color-coded MIL-spec wiring
- Insulating elastomeric dust cover
- MIL-spec anti-chafe fiberglass sleeve
- Ring terminals
- Crimp splices
- Installation instructions
- Also Included (not for installation on aircraft):
- An SAE to SB50 harness with handle and strain relief is also included for adapting a BatteryMINDer's "trailer plug" output to a mating SB50 plug.