Image for illustration only. It may show a product series rather than the exact product offered.
RX1-11-21070
BatteryMINDer Airframe Interface Kit For FAA-Certified Aircraft 12V
82.08 EUR/EA
Excluding VAT
Availability
Part numbers
- Roctexo
- RX1-11-21070
- Manufacturer
- BM-AIK2B
- Vendor
- 11-21070
Product details
The BatteryMINDer Airframe Interface Kit, manufacturer part number BM-AIK2B, is a 12 V kit intended to provide a fused airframe connection for an aviation-specific, low-current continuous-duty BatteryMINDer battery charger/maintainer.
The kit is designed around a two-wire aircraft harness with ring terminals at the battery-relay end and a polarised Anderson SB50 connection at the charger end. The supplied harness material allows for up to approximately 1.8 m of installation length.
- Manufacturer part number: BM-AIK2B
- 12 V airframe interface kit
- Polarised Anderson SB50 plug with protective handle and insulating dust cover
- 10 A inline fuse
- Colour-coded MIL-specification 16 AWG unshielded aircraft wire, up to approximately 1.8 m
- MIL-specification anti-chafe fibreglass sleeve, ring terminals and crimp splices
- Includes an SAE-to-SB50 adapter harness for the charger side; this adapter is not intended for aircraft installation
- Installation instructions included
The supplied source describes the kit as using standard aircraft parts for installation on FAA-certificated aircraft under applicable US regulations. For aircraft operated under EASA or national European requirements, installation eligibility, approved data and release-to-service requirements must be confirmed by appropriately authorised maintenance personnel before installation.