ROCTEXOAEROSPACE
A commercial account is required before proceeding to checkout. Select a commercial account or create a commercial account.
You are using our new webshop. The old webshop is still available.
RX1-07-27273

Image for illustration only. It may show a product series rather than the exact product offered.

RX1-07-27273

B&C Alternator Spline Driven 20-30 Amp BC410-H with SB1B-14 14V - for Homebuilt

1528.95 EUR/EA

Excluding VAT

Availability

Not in stockAvailable to order. Lead times vary.

Part numbers

Roctexo
RX1-07-27273
Manufacturer
BC410-H-SB1B-14
Manufacturer
BC410-H_SB1B-14
Vendor
07-27273

Product details

The B&C BC410-H-SB1B-14 is a 14 V spline-driven alternator configuration for experimental/homebuilt aircraft electrical systems. It combines the BC410-H externally regulated alternator with the SB1B-14 standby alternator controller.

The BC410-H mounts on a standard AND20000 vacuum-pump accessory pad and provides a nominal 20–30 A output, depending on engine cruise RPM. Its design features sealed ball bearings, dual cooling fans, a dynamically balanced rotor and a shear-section drive coupling.

The included SB1B-14 controller is intended for standby alternator control in a 14 V, single-bus, single-battery electrical system. It provides linear voltage regulation and solid-state over-voltage protection.

  • Manufacturer part number: BC410-H-SB1B-14
  • Alternator: BC410-H spline-driven, externally regulated
  • Controller: SB1B-14 standby alternator controller
  • Electrical system: 14 V
  • Nominal alternator output: 20–30 A, dependent on cruise RPM
  • Application category: experimental/homebuilt aircraft

Refer to the applicable B&C technical manual, wiring diagram and instructions for continued airworthiness when planning installation and system integration.