RX1-11-16557

The Appareo Stratus ES with 3i Kit is an experimental-aircraft avionics package combining a 1090ES ADS-B Out transponder with the Stratus 3i ADS-B In receiver.

Stratus ES is designed to use an external GPS source, while the supplied Stratus 3i receiver is wired to the transponder and receives ADS-B and GPS information through the aircraft’s externally mounted antennas. The Stratus 3i also incorporates backup AHRS capability.

• Manufacturer part number: 153010-000040/62
• 1090ES Mode S extended-squitter ADS-B Out transponder
• Stratus 3i wired ADS-B In receiver kit
• Push-button interface with OLED display
• Pressure-altitude monitoring
• Power input: 9–36 VDC; typical power consumption: 15 W
• Operating temperature: −20 °C to +55 °C
• Approximate installed unit dimensions: 162 mm wide × 43 mm high × 273 mm deep
• Approximate weight including rack and connectors: 1.5 kg

This configuration is intended for experimental aircraft and is not EASA/FAA approved. Installation should be carried out in accordance with the applicable Appareo installation instructions and the aircraft’s approved build or maintenance data.

Relevant manufacturer documentation: Stratus 3i Installation Guide.