RX1-11-17378

The Alpha Systems AOA Eagle Pressurized Kit with HUD Mounting Kit is an angle-of-attack indication system configured with a flush-mount heads-up display adapter. Manufacturer part number: DSTR-AOA-9600PK-(HUD).

The pressurized Eagle configuration uses separate pressurized display and sensor interface modules, with the sensor interface located outside the pressure bulkhead. The Eagle display uses a full-colour chevron indication format, while the HUD adapter presents the display indication on an anti-glare beam-splitter lens positioned above the display for viewing near the pilot’s line of sight.

• Pressurized Eagle AOA configuration with flush-mount HUD adapter
• Eagle display, switch panel module, pressurized interface module and sensor interface module
• Non-heated standard AOA probe and probe mounting plate
• Pre-wired cable/connector harnesses, pneumatic hose, mounting hardware and HUD cover
• Three-point, aircraft-specific calibration through the remote switch panel
• 16 LED brightness settings with display photocell for day/night brightness control
• Audio output provision, selectable audio modes and switch-panel audio mute function
• Electrical input: 12–28 VDC; maximum system current draw: 0.250 A at full brightness

Installation and in-flight calibration should be carried out in accordance with the applicable Alpha Systems documentation and the aircraft’s approved maintenance and operational requirements. Approval status and installation eligibility must be verified for the individual aircraft and operating authority.

Manufacturer documentation: Eagle Installation Manual and Eagle Operations Manual.