Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN8-42
AN8-42 Bolt Drilled Shank
7.82 EUR/EA
Excluding VAT
Availability
Up to 46 EA ready to ship on Thursday 2026-11-12Order before 16:00 CET Today
Up to 84 EA ready to ship on Monday 2026-11-16Order before 16:00 CET Today
159 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN8-42
- Manufacturer
- 13766-1
- Manufacturer / Vendor
- AN8-42
Product details
The Airfasco AN8-42 is a hex-head aircraft bolt with a drilled shank, intended for installations requiring cotter-pin retention. It is identified by manufacturer part numbers AN8-42 and 13766-1.
- AN8 series bolt with 1/2-20 thread
- Drilled shank configuration
- Nominal length: approximately 110 mm, measured from beneath the head to the end of the shank
- Nominal grip length: approximately 90 mm
- Cadmium-plated high-strength alloy-steel AN bolt series
- Unit of measure: each
Confirm the required bolt callout, grip length, thread condition and retention arrangement against the applicable maintenance data before installation.
| Condition | NEW |
|---|---|
| Diameter | 0.499" - 0.495" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 3.563" |
| Length +.031" / -.016" | 4.344" |
| Locking Mechanism | Drilled Shank |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.27 |
| Thread Length | 0.781" |
| Thread Specs | 1/2-20 UNF-3A |
| Unit Of Measure | EA |