Image for illustration only. It may show a product series rather than the exact product offered.
Airfasco
RX1-AN4-60
AN4-60 Bolt Shank Drilled
8.93 EUR/EA
Excluding VAT
Availability
Up to 1 EA ready to ship on Monday 2026-11-16Order before 17:00 CET on Friday 2026-11-13
22 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-AN4-60
- Manufacturer
- 09911-1
- Manufacturer / Vendor
- AN4-60
Product details
The AN4-60 is a hex-head aircraft bolt with a shank drilled to accept cotter-pin retention where the installation calls for it.
- Part number: AN4-60
- Manufacturer part number: 09911-1
- Thread series: 1/4-28
- Nominal length: approximately 153 mm, measured from under the head to the end of the shank
- Grip length: approximately 141 mm
- Drilled shank configuration
Suitable for maintenance and assembly work requiring the specified AN4-60 bolt configuration. Verify the required part number, grip length, material finish, and applicable installation data before use.
| Condition | NEW |
|---|---|
| Diameter | 0.249" - 0.246" |
| Finish | Cadmium Plated, AMS-QQ-P-416, TYPE II, CLASS 2 |
| Grade | 4037 or 8740 |
| Grip ± .016" | 5.563" |
| Length +.031" / -.016" | 6.031" |
| Locking Mechanism | Drilled Shank |
| Manufacturer | AIRFASCO |
| Material | Alloy Steel |
| Packaged Amount | INQUIRE |
| Ref Pc Weight (lb) | 0.087 |
| Thread Length | 0.468" |
| Thread Specs | 1/4-28 UNF-3A |
| Unit Of Measure | EA |