ROCTEXOAEROSPACE
A commercial account is required before proceeding to checkout. Select a commercial account or create a commercial account.
You are using our new webshop. The old webshop is still available.
RX2-1201

Image for illustration only. It may show a product series rather than the exact product offered.

Aero-Sense NV

RX2-1201

AERO-SENSE ICE-5 KEROSENE FUEL ADDITIVE 1L

20.56 EUR/EA

Excluding VAT

Availability

17 EA ready to ship TodayOrder before 15:30 CET Today
AOG

AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.

Accept and see AOG contact details

+46106500380 aog@roctexo.com

Part numbers

Roctexo
RX2-1201

Product details

ICE-5 Fuel System Icing Inhibitor

Aero-Sense ICE-5 Fuel System Icing Inhibitor (FSII) is an anti-icing additive that prevents icing of water in aircraft fuel systems Aircraft that lack fuel heating systems are vulnerable to the freezing of small amounts of autonomous water in the fuel, which may block fuel lines, filters and valves. Mixing ICE-5 into the fuel at a ratio of 0,07% up to 0,10% by volume according MIL-DTL-83133 or 0,10% up to 0,15% by volume according DEF Stan 91-91 will stop this from happening. One litre of ICE-5 can treat from 660 to 1,429 litres of fuel. Mix thoroughly to avoid separation of the inhibitor and fuel.

  • Made in the EU
  • Fully water-soluble
  • Inhibits bacteria-growth in fuel tanks

Product info

Brand ​Aero-Sense

Available in

1 litre can
20 litre can
200 litre barrel
1,000 litre IBC

Certification

ASTM-D4171-03 compliant
Chemical properties according to MIL-DTL-85470 & DEF STAN 68-252
British Joint Service Designation AL-41
NATO Code Number S-1745

Application

ICE-5 FSII is mixed in the fuel at rates of 0,07% up to 0,10% by volume according MIL-DTL-83133 or 0,10% up to 0,15% by volume according DEF Stan 91-91. To avoid overdosing, check the ratio of DiEGME in the kerosene before using ICE-5. Mixing is required to avoid separation of the inhibitor and fuel.

General info

Verify that the application conforms to the P.O.H. and the aircraft or engine manufacturer’s instructions. ICE-5 concentrate must not come into direct contact with the aircraft’s painted surfaces or the fuel tank’s coated interior.