Image for illustration only. It may show a product series rather than the exact product offered.
RX1-11-03654
ACS Ignition Service Kit A-3650-2
32.87 EUR/EA
Excluding VAT
Availability
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
Part numbers
- Roctexo
- RX1-11-03654
- Manufacturer
- A-3650-2
- Vendor
- ASS-11-03654
- Vendor
- 11-03654
Product details
Overview
Consists of replacement internal switch contacts, lubricant, diode assembly, and terminal board as required for compliance with ACS Ignition Switch Service Bulletin SB92-01. Kit A-3650-2 contains diode assembly for starter solenoids with one or two coil contacts. JUMPER USED WHEN LEFT MAG HAS IMPULSE COUPLING OR IS RETARD BREAKER MAG Installation of Ignition Switch A) Use SHIELDED wire on all connections and ground to nearest structural member. B) Terminal 1 must have a jumper installed when LEFT MAG has IMPULSE COUPLING or is RETARD BREAKER MAG. C) Connect wire from RIGHT MAG to terminal 1 of drawing. Connect wire from LEFT MAG to terminal 2 of drawing. Connect wire from STARTER SOLENOID to terminal 3 of drawing. Connect wire from Positive terminal of power supply to terminal 4 of drawing. Connect wire from terminal 5 of drawing to nearest structural membe. Made in USA |