RX1-05-22406

The 51180-50 Jet Starter Hose & Leno Weave Jacket Assembly is a 50 ft (approximately 15.2 m) jet-start hose assembly, identified by manufacturer part number 00862170001. It combines a silicone-rubber hose with a replaceable lenoweave scuffer jacket for added protection against abrasion associated with ramp handling.

The hose construction incorporates synthetic-yarn reinforcement to support flexibility, dimensional stability and high burst strength. The lenoweave jacket is a closely woven treated fabric with abrasion-resistant rubber applied in a spiral pattern.

• Hose length: 50 ft (approximately 15.2 m)
• Inside diameter: 3.5 in (approximately 89 mm)
• Wall thickness: approximately 4.8 mm
• Operating pressure: 100 psi (approximately 6.9 bar)
• Proof pressure: 200 psi (approximately 13.8 bar)
• Rated temperature range: -80 °F to +500 °F (approximately -62 °C to +260 °C)
• Maximum static load: 2,000 lb (approximately 907 kg)

Suitable for replacement or maintenance requirements where the specified jet starter hose and lenoweave protective-jacket configuration is required. Confirm part-number, dimensional and operational requirements against the applicable equipment documentation before installation.