Image for illustration only. It may show a product series rather than the exact product offered.
3M
RX1-09-06465
3M Scotch-Weld Epoxy Adhesive DP125 Gray 48.5 ml Duo-Pak
36.33 EUR/EA
Excluding VAT
Availability
Part numbers
- Roctexo
- RX1-09-06465
- Manufacturer
- 7100320278
- Vendor
- 09-06465
Product details
3M™ Scotch-Weld™ Epoxy Adhesive DP125 Gray is a low-odour, two-part structural epoxy adhesive supplied in a 48.5 mL Duo-Pak cartridge. Its 1:1 mix ratio and controlled-dispensing format support clean, consistent adhesive application for maintenance and assembly work.
The gray DP125 formulation is designed to produce strong, flexible bonds and to accommodate limited movement and thermal expansion between bonded materials. 3M identifies it for bonding metal, ceramics, stone, wood and many plastics, including dissimilar surfaces where appropriate surface preparation and process control are used.
- Manufacturer: 3M
- Manufacturer part number: 7100320278
- Product: Scotch-Weld™ Epoxy Adhesive DP125, Gray
- Format: 48.5 mL Duo-Pak cartridge
- Mix ratio: 1:1
- Working time: up to 25 minutes
- Set / handling time: approximately 2.5 hours
- Full cure: 7 days at 23 °C
The Duo-Pak format is intended for use with suitable 3M dispensing and mixing equipment. Verify material suitability, surface preparation, cure conditions and any applicable maintenance data before use.
Relevant documentation: 3M technical data sheet for Scotch-Weld™ Epoxy Adhesive DP125 Gray.