Image for illustration only. It may show a product series rather than the exact product offered.
RX1-2600-6W
2600-6W Camloc Cadmium Wing Stud
48.36 EUR/EA
Excluding VAT
Availability
6 EA ready to ship TodayOrder before 15:30 CET Today
AOG
AOG service might be available even outside our opening hours. AOG services incur a fee starting from 100 EUR.
Accept and see AOG contact details
22 EA available on request, inbound freight fee of 60 EUR appliesSpecial order from vendor stock.
Part numbers
- Roctexo
- RX1-2600-6W
- Manufacturer / Vendor
- 2600-6W
Product details
| Type | Description | Part No. |
|---|---|---|
| Cad Plated | Camloc Wing Stud | 2600-6W |
Overview
| 2600/2700 STUD LENGTH SELECTION Total material thickness “G” consists of the thickness of all materials to be fastened. This must include the thickness of the material “P” to which the stud assembly is attached, the material “F” to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration. P (panel thickness)..................... .062 F (frame thickness................... + .062 GRIP (total thickness).............. = .124 |
| STUD SELECTION TABLE Using 212-12 Receptacle |
| Total Grip Thickness | Use 2600 | Use 2700 |
| .021-.059 | 2600-1 | 2700-1 |
| .060-.089 | 2600-2 | 2700-2 |
| .090-.119 | 2600-3 | 2700-3 |
| .120-.149 | 2600-4 | 2700-4 |
| .150-.179 | 2600-5 | 2700-5 |
| .180-.209 | 2600-6 | 2700-6 |
| .210-.239 | 2600-7 | 2700-7 |
| .240-.269 | 2600-8 | 2700-8 |
| .270-.299 | 2600-9 | 2700-9 |
| .300-.329 | 2600-10 | 2700-10 |
| .330-359 | 2600-11 | 2700-11 |
| .360-389 | 2600-12 | 2700-12 |
| .390-.419 | 2600-13 | 2700-13 |
| .420-.449 | 2600-14 | 2700-14 |
| *4002-G grommet requires .090" minimum grip. |
2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
| PN 2600-SW-2 | PN 2600-LW |